Of this file in the event you need to restore coding settings.

Rememeber this file is overwritten each time a readout of a module is performed.

This file was created when READ ECU was performed and contains the coding values for that module. Navigate to the Work folder which resides in your NCSEXPER directory. You will get a NETTODAT.TRC file popup simply close it. Now you can choose READ ECU to perform a read out of the module. Select the Module/ECU you would like to work with, In this case the CAPPL. You will now get a list of installed modules that were identified when communication with the chosen 'main' module as before.Ĭhoose Process ECU to work with a single module. Upon seeing the above screen with the FG and FA Values displayed simply hit F6 or Back. you can also just 'exit' NCS if you make mistake and start over. remeber you are only reading, it's ok if you select wrong module here. (You may have different 'main' modules depending on your car, example maybe ALSZ or KMP. Select the model car, In this case E89 which is for the E90Ĭhose the Module in which to read the ZCS/FA, In this case we chose CAS. but at this stage you are only reading a module. but as safe guard, you are using one that can only read, till you are more comfortable. You can use Expertmode profile for both reading and coding. It is basically about Permissions by profile.) (or search for instructions to set up your own profile. Once NCS is open Choose File from the top menuĬhoose Fister profile if you have obtained it or new_expertmode / car/key memory. This excercise is purely for example and can be adapter for different modules and different changes. In this tutorial I am going to disable the Legal Disclaimer that pops up on the Idrive unit of an E90.

Ncs expert e90 profile